Paid upfront. No testing required. Freight, rigging and teardown at our cost.
MJ Electrical Switchgear Buyers logo MJ Electrical Switchgear BuyersBuying switchgear nationwide
  1. Home
  2. Locations
  3. Minnesota
  4. Brooklyn Center

Brooklyn Center, MN · the Upper Midwest

Brooklyn Center, MN: Sell Us Your Switchgear

Sale your Electrical Switchgear now !

  • Paid before pickup
  • No testing required
  • Freight and rigging covered
  • Any amperage, any condition
Used Square D low voltage switchgear lineup with main breaker and molded case branch breakers, staged indoors during an electrical room demolition
50States Covered
100A - 5000AAmp Range Purchased
Same DayTypical Offer Turnaround
$0Cost to the Seller

Request a Quote

We buy switchgear in Brooklyn Center, MN and throughout Minnesota. There is no obligation.

Or call 954-740-1983. Photos of the nameplate and the full lineup get you the fastest, firmest number — text or email them anytime.

Why Sellers Choose Us

What a Brooklyn Center switchgear sale involves on your end

01You Are Paid Before It Moves

Funds change hands before a single section leaves your property. There is no consignment and no waiting on a downstream resale.

02No Testing Is Required

You are never asked to test, energize, clean or repair the gear. Our team evaluates it from the nameplate photos and our own inspection.

03We Cover Freight and Rigging

Lowboys, flatbeds, cribbing, section separation and permits are billed to us. That cost is already priced into the offer you receive.

04Our Crews Handle Teardown

Disconnection coordination, dismantling, rigging out of the electrical room and loading are performed by our crews at our expense.

The Brooklyn Center Market

Idle switchgear in a Brooklyn Center electrical room costs you space, liability and usually a line item on a demolition bid. We take it and pay you. We hold Minnesota inventory moving through Minneapolis, so consolidating your Brooklyn Center lineup onto an existing load is usually possible. Sellers are rarely asked to do more than grant site access. Teardown, section separation, rigging and transport are handled by our crews at our cost.

Every class of distribution equipment is in scope. What we see most often in Brooklyn Center is unit substations with the primary and secondary attached and plug-in busway runs with bus plugs attached. Across Minnesota we also buy panelboards in bulk lots off a gut renovation, 2000A main-tie-main lineups from a light industrial park and 3000A drawout switchgear pulled during a service upgrade.

Who We Buy From

Our sellers here are typically electrical supply houses moving old inventory, water and wastewater treatment authorities, commercial property managers doing a tenant retrofit. We also buy from general contractors on an adaptive-reuse project and pulp, paper and lumber mills.

Most sales trace back to one of a few situations:

  • A cancelled or downsized build left new gear crated and never installed.
  • The manufacturer discontinued the line, so parts support ended and the lineup was replaced wholesale.
  • A service upgrade left the original lineup stranded at the wrong amperage.
  • A flood or storm replacement has arrived and the damaged gear needs to be removed.

Pickup and Freight in Brooklyn Center

We stage flatbeds and lowboys near Minneapolis and dispatch into Brooklyn Center as loads fill. Sections that will not fit through the door get separated on site and carried out piece by piece.

The gear is valued on its own merits. The cost of getting it out of Brooklyn Center is absorbed on our side. Sellers who already hold a scrap quote often find the difference substantial, because a scrap figure deducts hauling and ignores what the breakers, buckets and bus are worth to somebody who needs them.

Common Minnesota Equipment

Metal-Clad Switchgear

Compartmentalized drawout medium voltage gear with grounded metal barriers between sections.

How we buy metal-clad gear →

Circuit Breakers

Loose air, vacuum, insulated case and molded case breakers, individually or by the pallet.

How we buy breakers gear →

Motor Control Centers

MCC lineups with starter buckets, VFDs and combination starters from plants and utilities.

How we buy mccs gear →

Bus Plugs and Busway

Plug-in and feeder busway runs, elbows, tees and bus plugs from industrial ceilings.

How we buy busway gear →

Quote a Brooklyn Center Lineup

Send a nameplate photo and receive a firm number, usually the same day.

Or call 954-740-1983. Photos of the nameplate and the full lineup get you the fastest, firmest number — text or email them anytime.

How the Sale Works

Four steps, none of which cost you anything

  1. Send What You Have

    A photograph of the nameplate and one wide shot down the front of the lineup is enough to begin. If the nameplate is gone, photograph the gear anyway and we will work from the construction, the bus and the breaker frames.

  2. Receive a Firm Offer

    We respond with a committed cash figure, usually the same day. It is an offer rather than an estimate, and it does not move afterward.

  3. Schedule on Your Terms

    Pickup in Brooklyn Center is arranged around your outage window, plant shutdown or building access hours. Where a utility disconnect has to happen first, we coordinate the timing.

  4. We Pay, Then We Haul

    Payment is completed before anything moves. Our crew performs the teardown, the section separation, the rigging and the loading, and our truck removes it.

Long row of grey medium voltage switchgear and unit substation sections with louvered ventilation panels inside an electrical room, tagged and ready for removal — bought in Brooklyn Center, MN
Medium voltage sections lined up in an electrical room, tagged and ready for our crew to break down.

Selling Switchgear in Brooklyn Center: Common Questions

Straight answers

Do you actually come to Brooklyn Center to pick up switchgear?

Yes. We stage flatbeds and lowboys near Minneapolis and dispatch into Brooklyn Center as loads fill. We do not ask you to arrange freight, separate sections or deliver anything to us.

Do I need to have the gear tested first?

No. Testing is never a condition of our offer. We assess a lineup from photos, the nameplate and our own inspection at pickup.

What if the breakers have already been pulled out?

We still buy it. A complete lineup with its breakers installed is worth more, but empty structures have real value in bus and steel, and loose breakers sitting on a shelf are worth quoting on their own. Tell us what is still there and what has already gone.

When do I get paid?

Before anything leaves your property. Payment is not contingent on us reselling the equipment afterward.

Will you buy a single section in Brooklyn Center, or only full lineups?

Both. One switchboard section is worth a call, and if you have a full electrical room or several buildings coming down we will quote the entire lot as one purchase.

What if the lineup is still energized and in service?

That is normal. Tell us and we will coordinate the disconnection timing with your electrician or the utility, then handle the teardown and rigging ourselves.

Have Switchgear in Brooklyn Center to Sell?

Call or text a nameplate photo and we will return a firm offer, usually the same day.

Call or text 954-740-1983

Ready to Sell?

Send a nameplate photo and we will return a firm cash number for your Brooklyn Center switchgear.

Or call 954-740-1983. Photos of the nameplate and the full lineup get you the fastest, firmest number — text or email them anytime.

Call 954-740-1983